1:10 scale Rayz straight lace (LIMITED STOCK)

Set of four 1:10 scale chrome plated straight lace spokes for the Redcat lowriders. These are wrapped in our hollow rubber 520 tire with factory adhered whitewall and dense foam insert for the best hopping performance. Wheels are secured to the axles by the knock off center cap with chip decal already applied and secured with a clear topcoat. Please tighten securely but be mindful to not break the bars off. Proper seating of the wheel to the hub is necessary however. I recommend evenly pushing the hub into the back of wheel, then attaching to axle, as hubs can be a bit of a tight fit. Make sure the tire is evenly seated around the rim as well. You will need to use with 7mm hex hubs on the front to avoid interference from the A arms. I assume most of you have them already, if not you'll need to get some. Note that backsides of wheel are not plated.

These wheels are very strong and have been tested by me personally. I have had no issues with them cracking or chrome plating rubbing off. They're proven to be quite durable.

Available in 3 different chip colors. Black, white or grey. Knock offs not sold separately.